1. Zebra 220xiiii Driver
2. Zebra 110xiiii Plus Driver

R170Xi 203dpi Printer Specifications

Page 25: Table 1-1. Font Matrix For 8 Dot/Mm (203 Dpi) Printheads Section 1 System Description Table 1-1. Font Matrix for 8 dot/mm (203 dpi) Printheads Font Matrix Type. Character Size Inches Millimeters Baseline Intercharacter Cell Height Width Font Matrix Char/ Char/ Dots Width Height Width Height Width Inch U-L-D 0.044 0.030 33.87 1.13 0.75.

Standard Features

• Fully integrated ThingMagic UHF RFID Reader/Encoder
  • EPC Class 1
  • EPC Class 0
  • Matrics' 0+
  • ISO 18000-06B
  • EPC 'GEN 2' via firmware Update
• RFID processes optimized for fastest label throughput.
• New RFID ZPL commands allow ease of RFID set-up with maximum flexibility.
• Program position allows users to place transponders virtually anywhere within a smart label.
• RFID Calibration feature automatically selects the program position for optimal transponder placement.
• RFID counters keep track of the good and bad labels.
• Variable RFID power settings for both read and write allows maximum flexibility for printing small labels.
• Full function front panel and multilingual back-lit LCD display with user programmable password protection
• 4.0 MB Flash memory, including 2.0 MB user-available non-volatile memory storage for downloadable objects.
• ZebraLink ™ - the revolutionary real-time connectivity and control solution
  • ZBI ™ (Zebra BASIC Interpreter)
  • WebView (requires optional ZebraNet ® PrintServer)
  • Alerts (requires optional ZebraNet PrintServer)
• Communications via serial RS-232 and bi-directional Parallel port with auto detect
• USB 2.0 (480 Mbits/second) port
• Thin film print head with E 3® Element Energy Control
• Thermal transfer and thermal direct printing of bar codes, text, and graphics
• Dual media sensors, transmissive and reflective, selectable through software or front panel
• ZPL ® or ZPL II ® programming language, selectable through software or front panel
• ZBI ™ – Zebra BASIC interpreter for translation of foreign data streams into ZPL II
• 32 bit 133 Mhz RISC processor
• 16 MB SDRAM memory, 12 MB user-available.
• Type I, II linear memory only up to 32 MB and future availability of Type III Series PC Card Interface
• Simultaneous ATA-style PCMCIA and Compact Flash (CF) memory card support up to 1 GB (current market availability) for additional storage of fonts, graphics, logos, templates, and label formats or preprogrammed with optional and international fonts. PCMCIA is externally accessible and hot swappable. CF is internal.
• Clear media side door – easy monitoring of supplies usage without opening the printer
• Zebra printer driver for Windows ™ 95/98/NT/2000 operating systems
• Internal real-time clock
• Advanced label/media counters
• Auto calibration-printer calibrates when printer is turned on or when printhead is closed with approximately two labels
• Early Warning Systems-provide low label, low ribbon, and clean printhead alerts via the front panel and ZebraLink Alerts.

Zebra z6m plus 203 dpi printer drivers has become commonly placed for office or home, as well as many big companies applying it. Zebra 170xiiii plus 203 dpi printer drivers has been commonly placed for office or home, and perhaps many big corporations are utilizing it. It does not require a large space in the warehouse and is easy to operate. ZEBRA Model Number (dpi ) (width in inches) A300: 203: 4.1: DA402: 203: 4.09: GC420: 203: 1' TO 4.25' GK420d: 203: 4.09: GK420t: 203: 4.09: GX420d. Windows プリンタ Drivers by Seagull Scientific を使用すると、ラベル デザイン、ラベル印刷、RFID エンコードおよびカード印刷向けの BarTender ソフトウェアを含め、真の Windows プログラムからのラベル、カードなどの印刷が簡単に行えるようになります。.

• ZebraNet PrintServer II - provides Ethernet connectivity and full use of Zebranet Web View and Alert features
• ZebraNet Wireless Card Socket-provides an internally integrated wireless option and supports multiple third party LAN radio cards
• Clear media side bi-fold door – allows shorter media door opening radius
• Full-width rotary knife cutter and catch tray, operates under software control cutting labels individually or in strips
  Cutter Catch tray 10.5' long by 4.5' wide
• Media rewind spindle - rewinds finished roll internally onto 3' (76mm) core, or enables label peel and liner rewind
• 3' (76mm) core enables label peel and liner rewind
• RS-422/485 with multidrop capability to network to multiple printers from a single host with external adaptor P/N 33114M
• IBM ® Twinax interface - emulates IBM System 3X and AS/400 printers
• IBM Coax interface - emulates IBM System 3270 printers
• Applicator interface - provides status and control signals for applicators and remote control devices
• Media supply spindle for 3' (76mm) core or 40 mm core (in lieu of standard hanger)
• Linear PCMCIA cards are available 8 MB and 32 MB
• ATA-style PCMCIA or Compact Flash memory cards 16, 32, 64, 128, 256 MB
• Additional fonts available
• BAR-ONE® Windows-based WYSIWYG on-screen label design and print application software

Zebra 220xiiii Driver

• 203 dpi resolution (8 dots/mm)
• Dot size (W x L):0.0049' x 0.0049' (0.125mm x 0.125mm)
• First dot location measured from inside media edge:
  • 0.10' ±0.035' (2.5mm ±0.9mm)
• Maximum print width: 6.6' (168mm)
• Maximum non-continuous media print length:
  • 16MB memory = 39' (991 mm)
• Maximum continuous media print length:
  • 16MB memory = 100' (2540 mm)
• Media registration tolerance:
  • *Vertical = < ±0.060' (±1.5mm) on non-continuous media
  • Horizontal = < ±0.060' (±1.5mm)
• Programmable print speeds:
  • 2.4' (61 mm), 3' (76mm) through 12'(305mm) per second in 1' (25mm) increments
• Bar code modulus 'X' dimension:
  • Picket fence (non-rotated) orientation = 3.33 mil to 33 mil
  • Ladder (rotated) orientation = 3.9 mil to 39 mil

*Media registration and minimum labellength are affected by media type and width, ribbon type, and print speed.Performance improves as thesefactors are optimized. Zebra recommends always qualifying any application withthorough testing.

• Transponders utilizing the following protocols are supported:
  • EPC Class 1
  • EPC Class 0
  • Matrics' 0+
  • ISO 18000-06B
  • EPC 'GEN 2' via firmware Update
• Media type: continuous, die-cut, or black mark
• Media width (label and liner):
  2.0' (51 mm) to 7.1' (180 mm)
• Minimum label length: *
  • Rewind mode: 0.25' (6mm)
  • Peel mode: 0.5' (13mm)
  • Tear-off mode: 0.7' (18mm)
  • Cutter mode: 1.5' (38mm)
• Media thickness (label and liner):
  • 0.003' (0.076mm) to 0.012' (0.305mm)
• Maximum full-width media thickness for cutter:
  0.23 mm (0.009')
• Maximum media roll size:
  • 8.0' (203mm) O.D. on a 3' (76mm) I.D. core
• Transmissive (gap) sensing standards:
  • Interlabel gap: 2 - 4mm, preferably 3mm
  • Sensing notch: 0.25'W (6mm) x 0.12'L (3mm)
  • Sensing hole: 0.125' (3mm) diameter
• Reflective (black mark) sensing standards:
  • Black mark length (parallel to inside media edge): 0.12' - 0.43' (3 - 11mm)
  • Black mark width (perpendicular to inside media edge): 0.43' (> 11mm)
  • Black mark location: within 0.040' (1mm) of inside media edge:
  • Black mark density: >1.0 Optical Density Units (ODU)
  • Maximum media density: 0.5 ODU

  *Media registration and minimum labellength are affected by media type and width, ribbon type, and print speed.Performance improves as thesefactors are optimized. Zebra recommends always qualifying any application withthorough testing.

• width: 2.0' (51 mm) to 6.7' (170 mm)
• Standard Lengths: 1476' (450m) or 984' (300m)
  • Provides 2:1 and 3:1 media roll to ribbon ratios
• Maximum ribbon roll size:
  • 3.2' (81.3mm) O.D. on a 1.0' (25.4mm) I.D. core
• Ribbon wound coated-side out

• Bitmap fonts A through H and GS symbols are expandable up to 10 times, height and width independent
• Smooth scalable font Ø (CG Triumvirate ™ Bold Condensed) is expandable dot-by-dot, height and width independent
• IBM Code Page 850 International Characters

† U - Uppercase L - Lowercase D - Descenders

Zebra 110xiiii Plus Driver

Bar code ratios: 2:1, 7:3, 5:2, and 3:1

Linear bar codes: Code11, Code 39, Code 93, Code 128 with subsets A/B/C and UCC Case Codes, ISBT -128,UPC-A, UPC-E, EAN-8, EAN-13, UPC and EAN 2- or 5-digit extensions, Plessey,Postnet, Standard 2 of 5, Industrial 2 of 5, Interleaved 2 of 5, LOGMARS, MSI,Codabar and Planet Code

2-dimensional bar codes:Codablock, PDF-417, Code 49, DataMatrix, Maxi Code, QR Code and TLC 39, RSS-14(and composite)

Zebra Programming Language® (ZPL ® and ZPL II ®)

• Communicates in printable ASCII characters
• Compatible with mainframe, mini, and PC hosts
• Downloadable objects include graphics, scalable and bitmap fonts, label templates and formats
• Object copying between memory areas (RAM and PC memory card)
• Adjustable print cache (^COY)
• Data compression
• Automatic memory allocation for format while printing
• Automatic serialization of fields (^SN and ^SF)
• Format inversion (white on black) (^FR and ^LR)
• Mirror-image printing (^PM)
• Four position field rotation (0º, 90º, 180º, 270º) (^FW)
• Slew command (^PF and ^PH)
• Programmable label quantities with print, pause, cut control (^PQ)
• User programmable password (^KP)
• Status messages to host upon request (~HS)
• ZBI™ (Zebra BASIC Interpreter)
  • Interpreting program module that sits between the communication ports and the ZPLII processing engine
  • Can be used to convert non-ZPL printer programming language to ZPL commands
  • Direct interface to peripheral devices such as bar-code scanners, weight scales, and keyboards
  • Based on ANSI BASIC computer language

• USB 2.0 (480 Mbits/second) port
• High-speed bi-directional parallel interface, IEEE 1284-1994 compatibility, nibble mode, and ECP modes.
• RS-232C serial interface with DB9F connector, optional converter for DB25F available. Configurable baud rate (110–115.2 kB), parity, data bits, and stop bits
• Software (XON/XOFF) or hardware (DTR/DSR) communication handshake protocols
• Optional RS-422/485 with multidrop capability to network multiple printers from a single host with external adapter P/N 33114M
• IBM® Twinax interface-emulates IBM System 3X and AS/400 printers
• IBM Coax interface-emulates IBM System 3270 printers
• Applicator interface with DB15F connector

• Universal power supply with power-factor correction 90-264VAC, 48-62 Hz
• AAgency approvals: Bi-National UL 60950 3rd edition/CSA CAN/CSAC22.2 No. 60950-00 Third Edition; FCC Part 15.107 & 15.109 Class No. 60950-00 Third Edition; FCC Part 15.107 & 15.109 Class

• Operating environment:
  • Thermal transfer = 41º to 104ºF (5º to 40ºC)
  • Thermal direct = 32º to 104ºF (0º to 40ºC)
    • 20% to 85% non-condensing R.H
• Storage/Transportation environment:
  • -40º to 140ºF (-40º to 60ºC)
  • 5% to 85% non-condensing R.H.

• Power consumption:
  • Idle = 20W
  • Printing = 121W (printing pause test label at lowest speed)
  • Standby = 25W
• Height: 15.5' (393.7 mm)
• Width: 10.37' (263.5 mm)
• Depth: 19.5' (495.3 mm)
• Weight: 50lbs. (22.7kg)